Lumibricks Western Carpentry Workshop (14015) Review – A Darkly Brilliant Surprise

I have a confession: I actually have quite a few sets from the Lumibricks Western theme sitting in my backlog, but I just hadn’t gotten around to them yet. But this one? Lumibricks Western Carpentry Workshop jumped straight to the front of the queue because of a very odd scenario.

This set hasn’t even been officially announced yet.

It randomly appeared on Amazon with a tiny filler image. It said “Out of Stock,” but I placed an order anyway, assuming it would eventually get cancelled. A couple of weeks later, a heavy box arrived at my door.

So, this is technically a review of a set that doesn’t officially exist yet. And honestly? I am so glad it showed up.

Set Information

Set Name	Western Carpentry Workshop
Set Number	14015
Theme	Old West
Piece Count	1,832 pieces
Prints	71 printed elements
Dimensions	32.8 x 26.6 x 30.7 cm
Age Rating	16+
Power Supply	2 x Battery Box (USB power option included)

The Build: More Than Meets the Eye

At first glance, this looks like a simple frontier workshop. Do not let the footprint fool you because there is serious mass here once you start putting bricks together.

The build is essentially split into two halves. You have the main green carpentry workshop and the attached coffin maker annexe. The colour palette across the entire set is completely spot on, perfectly capturing that dusty, faded frontier town vibe.

The Main Carpentry Shop

The main building is constructed in layers. You build the core structure first with the entire front open, and later attach the full façade at the front, giving it that Wild West street presence.

The Interior The workshop is packed with narrative detail. There is a large circular saw assembly with gear detailing. You will find loose planks scattered on the floor, hanging chains, a vice, and a green swivel chair. There is even a small yellow mug sitting on the floor, as if our eyepatch wearing carpenter just stepped away.

The Attic & Roof The roof features a repaired, mismatched plank effect that instantly reminded me of the legendary LEGO Old Fishing Store. Inside the attic, it is kept relatively simple. You will find exposed beams and a hanging golden light, but the main purpose of this space is functional. It gives you a great, hidden area to cleanly tuck away the main battery pack and the lighting expansion board.

The Hidden Safe Room Swivel the chair on the ground floor, and a hidden back wall swings open like a vault door. Inside sits a small desk, a lantern, a mounted rifle, and a “Wanted: Dead or Alive Ghost Stack” poster. Clearly, this carpenter needs a safe room for when things get a little rowdy in town.

The Façade Later in the instructions, you build the entire green façade and brown porch as a completely separate assembly. Once finished, this entire front wall just clicks onto the main structure with technic pins. The façade itself is packed with character. At the very top, there is a beautifully designed inverted arch that gives the building a quintessential Wild West aesthetic. If you look closely at the green brickwork, you will also spot printed gunshot holes and deep scratches. It really sells the illusion that this town sees its fair share of shootouts.

The Tree I have to give a special mention to the tree sitting just to the right of the main façade. I usually dread building brick trees because they have a terrible habit of falling apart if you so much as look at them. But this one was a genuinely pleasant surprise. It is a simple build, but it is incredibly sturdy and very well placed. It adds a striking natural element to the scene, and the pale, almost minty green colours they used for the leaves are unlike any I have seen before. They contrast beautifully with the darker tones of the workshop.

The Tragic Tombstone: Built into a swing out hinge mechanism on the side of the façade building is a hidden tombstone. The inscription reads “Annabelle Horne, Nee O’Malley, 1838 to 1885”. If the shop owner is E. Horne, this is clearly a memorial to his late wife. It adds a surprisingly tragic, personal layer to the whole set.

The Coffin Maker Annexe

Attached to the side is the coffin workshop, topped with a striking sand blue roof and a brilliant sign reading:
“E. Horne Coffins & Furniture. Honest Work Since 1872. You Name It, We Frame It.”

This side of the build leans heavily into some excellent, slightly morbid storytelling.

Around the exterior you get small workshop details that reinforce the setting, including a long-handled lifting tool with a rope loop stored in a barrel and leaning against the wall. It is a simple touch, but it reminds you this is a working carpentry yard, not just a display façade. Add the vulture perched above on the main building, and the tone is very clear without being forced.

There are actually two coffins included here.

The first is a smaller coffin laid on a spoked-wheel cart. The cart build is excellent and feels perfectly in scale for a dusty frontier town delivery.

The second coffin is larger, and this is where the storytelling really ramps up. The instructions have you lean it up against the side door of the workshop, almost like it is waiting its turn. Inside lies the “corpse” scene shown on the box art.

The body is the female minifigure, her printed face showing closed eyes and even a small trickle of blood. It is dark, yes. But this was the Wild West. Life was harsh. There is no point sugar coating it, and I respect Lumibricks for committing to that realism.

Getting Inside: Accessibility

One thing I always look for in a modular or building set is how easy it is to interact with the interior once it is finished. Lumibricks did a good job here.

The Safe Room: There is a large swinging wall at the back that acts like a vault door, giving you full access to the secret room. Oddly, there is also a small swinging door section just to the side of the building that opens into that exact same room. I think this second door is probably unnecessary, but it does not hurt the build.

The Main Workshop: The roof hinges completely up on levers so you can easily see inside the carpentry workshop from above. Better yet, when you pull the front facade off, you get a completely unobstructed view of the workshop from the open front.

The Coffin Annexe: This side structure naturally features a full open front design, coupled with the half open workshop loading door on the side where the finished coffins roll out.

All in all, the accessibility is more than sufficient.

The Cast: Who is in town?

You get four minifigures in this set that perfectly populate the scene:

• The Craftsman (E. Horne): An older gent with white hair, an eyepatch, and a satchel. He is the face of the business.
• The Apprentice: A younger character in a patched blue shirt and suspenders.
• The Outlaw: A rugged looking gunslinger with a facial scar and a chest bandolier. Looking closely at him, I am willing to bet he is the infamous “Ghost Stack” from the hidden wanted poster!
• The “Client”: The deceased woman with red hair and a printed corset. Notice the tiny trickle of blood on her chin? It is a beautifully dark touch.

Instructions, Prints

To keep things consistent with my other reviews, let us talk about the technical side of the build.

• Instructions: The manual is incredibly clear, which is vital when you are dealing with hidden mechanisms and lighting wires. Routing the cables for the lanterns is frustration free. Everything was clear and I had no issues.
• Printed Parts: There are absolutely zero stickers in this box. Everything is printed directly onto the bricks. The “Wanted” poster, the gorgeous “Honest Work” shop signs, the tombstone inscription, the bullet holes on the facade, and even the weathered grain on the windmill blades are all high quality prints.

The Windmill & Water System – More Than Decoration

The windmill is not just there to look impressive. It is connected via pipework to a water storage setup.

You have a vertical shaft coming down, a pump assembly, a barrel mounted on a stand, a tap valve, and a small trough below. It looks like a gravity-fed water system.

For a frontier workshop, that makes complete sense. You would need water for soaking timber, cleaning tools, and general work. It is historically grounded and cleverly executed.

And the printed weathering on the windmill blades adds that worn prairie feel.

Exterior Wood & Log Details

The chopped logs outside are not plain cylinders. The printed tree rings on the ends are a great touch. Stacked barrels, wood piles and scattered planks give the entire build a layered look.

The coffin itself is also surprisingly elegant. The printed rose and gold clasp add character. It feels less like a prop and more like a finished product.

Lighting (And My One Gripe)

If you read my recent post on Wireless Power Solutions, you know I am picky about lighting setups.

Aesthetically, Lumibricks nailed the non modern setting. Everything uses warm, yellow glows from the lanterns so there is no harsh white light here. The best touch is a light hidden behind the coffin sign that shines upward to illuminate the windmill at night. It is a genius design choice that gives the build immense depth.

However, we need to talk about the battery packs. The main battery pack is perfectly hidden in the attic. But the green facade section has its own separate battery pack tucked under the porch.

I understand why they did this. It allows you to pull the facade away and still have the lights active on both sections. But personally, I would have vastly preferred the wireless connection system they use in the Cyberpunk sets. Yes, the facade lights would go off when you remove it, but realistically, you only remove it to look inside. When you put it back, everything would seamlessly light up again. It works fine as is, but it feels like a missed opportunity for a cleaner solution.

Final Thoughts

Wow.

Clever storytelling, strong colour choices, beautifully warm lighting, and real architectural depth. This is not just a flat Western facade. It is a fully realised scene packed with history, tragedy, and character.

Aside from my minor gripe about the secondary battery pack, this is an absolute triumph. If this is the standard for the Lumibricks Western theme, I need to start building the rest of my backlog immediately.

Pricing and Value

I paid £78.99 for this on Amazon. At the time, the listing looked unfinished. There was only a small placeholder image and very limited information. It also appeared on Amazon in Poland and Germany, which makes me think this may have been an early or temporary listing rather than a full official launch.

So I cannot say with certainty that £78.99 is the final retail price.

If that is the official price, then this is very aggressively positioned compared to some of their other sets. For the footprint, lighting, moving mechanisms, and sheer amount of detail included here, it would represent very strong value.

Until Lumibricks formally announce it, I would treat that price as provisional. But based on what I paid, I have zero complaints.

Where to buy

Related reading

If the Western Carpentry Workshop has caught your eye, these related Lumibricks reviews and guides are worth reading next:

Best Lumibricks Sets Guide for Beginners
Lumibricks Brand Review

If The Old West is your thing, you can see the rest of the theme here.

FAQ